ASTM A182 Duplex Steel S31803 Forged Socketweld Fittings

Duplex Stainless Steel S31803 Socket weld Fittings, ASTM A182 S31803 Forged Socketweld Fittings, Duplex Steel S31803 Socket weld Fittings, Duplex Steel UNS S31803 Forged Elbow, S31803 Duplex Steel Forged Socket weld Fittings, Duplex 1.4462 Socket weld Fittings, S31803 Socket weld Fittings, Duplex S31803 Forged Socket Weld Coupling Suppliers in Mumbai, India.


Leoscor Alloys is a manufacturer, supplier, and stockist of Duplex Steel UNS S31803 Socket weld Fittings. These Fittings are made using top-notch quality of SocketWeld Fittings.

When compared to other grades of duplex steel material and fitting types, Stainless Duplex UNS S31803 Socketweld Fittings products are less expensive. One of the reasons is that the composition has less molybdenum than other types of the duplex steel. This Duplex Steel has a lesser composition of Molybdenum, the raw material Duplex UNS S31803 contains chromium and nickel in the mid ranges. As a result, the Duplex UNS S31803 material performs halfway between austenitic and super duplex steel kinds.

The typical Duplex Steel S31803 material, Due to the reasonable cost and interchangeability of austenitic and duplex steel requirements. Our Duplex Steel UNS S31803 Socketweld Fittings offer good properties such as rust resistance, high tensile strength, wear and tear resistance, and so on. When compared to other stainless steel grades, Duplex UNS S31803 Fittings combine resistance to stress corrosion cracking, pitting, and high strength. S31803 Duplex Fittings are available in a variety of forms and diameters. UNS S31803 Socketweld Fittings that have been electro-polished have higher corrosion resistance.

We consider testing an important aspect as we are committed to offering only supreme quality of products. These fittings undergo a variety of testing like PMI, Bend test, Fatigue test, Impact test – Further categorized as Charpy test and Izod test, Hardness test, Tensile test, Wear test Corrosion resistance test.

Duplex Steel S31803 Socket weld Fittings

ASME SA182 S31803 Duplex Forged Socket weld Pipe Cap, ANSI B16.11 Duplex S31803 High Pressure Socket weld Fittings, Duplex S31803 Socket weld Forged 90° Elbow, DIN 1.4462 Forged Socket weld Full Coupling, Duplex Steel S31803 Socket weld Bushing, S31803 Socket weld Union, Duplex Steel S31803 Socket weld Cross Dealer, Duplex S31803 Equal Tee Manufacturer in India.

We specialise in Duplex Steel S31803 Socket weld Fittings Exporting in Turkey, Egypt, Singapore, Malaysia, Indonesia, Jordan, South Africa, Oman, Qatar, Italy.

Duplex Steel S31803 Socket weld Fittings Specification :

Specifications : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Designation : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB
Type : Socketweld Fittings
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

 

ASTM A182 S31803 Duplex Steel Socketweld Fittings

ASTM A182 S31803 Duplex Steel Socketweld Fittings

Duplex Steel S31803 Forged Socketweld Fittings

Duplex Steel S31803 Forged Socketweld Fittings

ASTM A182 S31803 Duplex Steel Forged Socket weld Fittings Equivalent Grades

STANDARD UNS WERKSTOFF NR.
Duplex 31803 S31803 1.4462

Duplex Steel S31803 ASTM A182 Socket weld Fittings Chemical Composition

C Mn Si P S Cr Mo Ni N Fe
0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 22.0 – 23.0 3.0 – 3.5 4.50 – 6.50 0.14 – 0.20 63.72 min

Ferritic/Austenitic Duplex Steel 1.4462 Socketweld Fittings Mechanical Properties

Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S31803 7.805 0.285 1420 – 1465 2588 – 2669

Price List of Duplex Steel S31803 Socketweld Fittings

Price of Duplex Steel Socketweld Fittings ASTM A182 S31803 : FOB Price: US $1-10000 / Piece

Price of Duplex Steel ASME SA182 S31803 Forged Socketweld Fittings : FOB Price: US $1-10000 / Piece


Duplex Steel UNS S31803 Forged Socketweld Fittings Available Stock at Leoscor Alloys

We have Largest inventory of Duplex Steel S31803 Socketweld Fittings. Duplex Stainless Steel S31803 Socketweld Fittings, S31803 Duplex Steel Forged Socketweld Fittings Suppliers, ASTM A182 S31803 Socketweld Fittings Exporter, S31803 Socketweld Elbow, S31803 Duplex Steel Socketweld Fittings Dealer, Duplex S31803 Socketweld Fittings Suppliers in Mumbai, India, S31803 Socketweld Fittings, Duplex Steel Socketweld Fittings, Duplex Steel Forged Socketweld Fittings, Duplex UNS S31803 Socketweld Fittings Stockholder, Duplex Steel S31803 Bushing, Duplex Steel S31803 Couplings Distributors, Duplex Steel DIN 1.4462 Socket Weld Boss, ANSI B16.11 Duplex S31803 Hex Nipple, S31803 Duplex Steel Socket Weld Tees, Duplex Steel S31803 Half Coupling, ASME SA182 Duplex S31803 90 deg Socket Weld Elbow Suppliers, UNS S31803 Socket Weld Fittings, Duplex Steel S31803 Union, UNS S31803 Socket Weld Fittings Stockist, ANSI B16.11 S31803 Socket Weld Full Couplings, Duplex Steel 1.4462 Socket Weld End Pipe Cap, Duplex S31803 Socket weld Pipe Nipple, S31803 Socket Weld Cross Suppliers, We are india's most trusted Manufacturer, Suppliers & Exporter of S31803 Duplex Steel Socket Weld Fittings, Duplex S31803 Forged Socket Weld Fittings are Available in Different Dimensions and Specifications in INDIA.


ASTM A182 Duplex Steel S31803 Forged Socketweld Fittings Application Industry


Duplex Steel S31803 Socketweld Fittings For Gas Processing Industries

Gas Processing Industries

Duplex Steel S31803 Socketweld Fittings For Petrochemical Industries

Petrochemical Industries

Duplex Steel UNS S31803 Socketweld Fittings For Power Generation Industries

Power Generation Industries

UNS S31803 Duplex Steel Forged Socketweld Fittings For Food Processing Industries

Food Processing Industries

ASTM A182 Duplex S31803 Socketweld Fittings For Chemical Industries

Chemical Industries

Duplex Steel S31803 Socket weld Fittings For Oil & Gas Industries

Oil & Gas Industries

ASME SA182 Duplex Steel S31803 Socketweld Fittings For Fertilizers Industries

Fertilizers Industries

S31803 Socketweld Fittings For Sugar Industries

Sugar Industries