Alloy Steel ASTM A234 WP9 Buttweld Pipe Fittings Supplier, Exporter, Manufacturer

Alloy Steel WP9 Pipe Elbow, Alloy Steel A234 WP9 Seamless Pipe Fittings, Alloy Steel WP9 Buttweld Pipe Fittings, Chromium-Molybdenum Steel WP9 Eccentric Reducer, ASME B16.9 Alloy Steel WP9 Reducer, Alloy Steel A234 WP9 Long Radius Elbow, Alloy Steel WP9 Butt weld Fittings, Alloy Steel WP9 Pipe Fittings, Chrome Moly WP9 Equal Tee Suppliers in Mumbai, India.


Leoscor Alloys and Steel Inc. is a known gathering, giving, passing on and exchanging unit of Alloy Steel WP9 Buttweld Pipe Fittings, which ought to be utilized as a part of nitric acid just in solutions of up to 0.5% concentration at room temperature. The rate of these Alloy Steel WP9 Elbow Butt Weld Pipe Fittings increments with increment in the sulphur dioxide content of the air, for example, may happen in industrial areas. In unadulterated unaerated acid, corrosion rates of Alloy Steel WP9 Equal Tee are low for all concentrations at environmental temperatures. In hot or concentrated solutions, rates of these Alloy Steel WP9 Cross Butt Weld Fittings are typically too high for sensible service life. The salts in Alloy Steel WP9 Pipe Reducer may create when hydrochloric acid interacts with iron and copper. This is because of the decreased inclination to accelerate malicious inter-metallic stages in these Alloy Steel WP9 Stub End, subsequently, bearing it more noteworthy flexibility than different alloys amid and following different thermal cycling conditions. Alloy Steel WP9 End Cap Butt Weld Pipe Fittings can be welded by all normal welding procedures, in spite of the fact that oxyacetylene and submerged arc segment welding forms are not prescribed when the manufactured thing is to be utilized as a part of corrosive service. Extraordinary safeguards for these Alloy Steel WP9 Dish Cap Butt Weld Pipe Fittings ought to be taken to stay away from intemperate heat input.

ASTM A234 Alloy Steel WP9 Buttweld Pipe Fittings

Alloy Steel WP9 Concentric Reducer, Alloy Steel WP9 Pipe Bend, Alloy Steel WP9 Stub ends, ANSI B16.9 Alloy Steel WP9 Pipe Cap, Alloy Steel WP9 90 Degree Elbow, CrMo A234 WP9 Industrial Pipe Fittings, Alloy Steel WP9 Welded Pipe Fittings, Alloy Steel WP9 Equal Cross, ASME SA234 Alloy Steel WP9 Buttweld Elbow Manufacturer in India.

We specialise in Alloy Steel WP9 Pipe Fittings Exporting in Turkey, Egypt, Singapore, Malaysia, Indonesia, Jordan, South Africa, Oman, Qatar, Italy.

ASTM A234 Alloy Steel WP9 Butt weld Pipe Fittings Specification :

Specification : ASTM A234 / ASME SA234
Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
WALL THICKNESS : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS, Custom Thickness.
Size : 1/8” NB TO 48” NB.
Type : Seamless / Welded / Fabricated

ASTM A234 Alloy Steel WP9 Pipe Fittings

ASTM A234 Alloy Steel WP9 Pipe Fittings

Alloy Steel WP9 Butt weld Fittings

Alloy Steel WP9 Butt weld Fittings

ASTM SA234 Alloy Steel WP9 Buttweld Pipe Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
A234 WP9 ≤0.15 ≤0.6 1.00 ≤0.03 ≤0.03 8-10 0.90-1.10

WP9 Alloy Steel Buttweld Fittings Mechanical Properties

Grade Tensile Strength (Mpa) Yield Strength (Mpa) Elongation %
A234 WP9 380 min 585 min ≥30

Types of Alloy Steel WP9 Fittings

ASTM A234 WP9 Elbow

ASTM A234 WP9 Elbow

  • WP9 Pipe Elbow 45 degree
  • SA234 WP9 Butt Weld Pipe Elbow
  • ASTM A234 WP9 90 degree Elbow
  • ASTM A234 Grade WP9 Elbow
  • Alloy Steel WP9 Elbow
  • Alloy Steel WP9 Pipe Elbow
  • Alloy Steel A234 Gr WP9 Buttweld Elbow
ASTM A234 WP9 Tee

ASTM A234 WP9 Tee

  • AS A234 WP9 Equal Tee
  • SA234 WP9 Reducing Tee
  • ASTM A234 WP9 Unequal Tee
  • ASTM A234 Gr WP9 Tee
  • Alloy Steel WP9 Tees
  • Alloy Steel WP9 Pipe Tee
  • Alloy Steel A234 Grade WP9 Buttweld Tee
ASTM A234 WP9 Reducer

ASTM A234 WP9 Reducer

  • SA234 WP9 Concentric Reducer
  • ASTM A234 WP9 Eccentric Reducer
  • ASTM A234 Gr WP9 Reducer
  • Alloy Steel WP9 Reducers
  • Alloy Steel WP9 Pipe Reducer
  • Alloy Steel A234 Grade WP9 Buttweld Reducer
  • A234 WP9 Butt Weld Pipe Reducer
A234 WP9 Stub End

A234 WP9 Stub End

  • ASTM A234 Gr WP9 Alloy Steel Long Stub End
  • A234 WP9 Butt Weld Pipe Stub End
  • SA234 WP9 Lap Joint Stub End
  • ASTM A234 WP9 Stub End Fittings
  • Alloy Steel WP9 Short Stub End
  • Alloy Steel WP9 Pipe Stub End
  • Alloy Steel A234 Grade WP9 Buttweld Stub End
ASTM A234 WP9 Bend

ASTM A234 WP9 Bend

  • Alloy Steel A234 Grade WP9 Buttweld Bend
  • A234 WP9 Long Radius Piggable Bend
  • SA234 WP9 Induction Bend Pipe
  • ASTM A234 WP9 45 degree Bend
  • ASTM A234 Gr WP9 Long Radius Bends
  • Alloy Steel WP9 Piggable Bend
  • Alloy Steel WP9 Pipe Bend
ASTM A234 WP9 Cap

ASTM A234 WP9 Cap

  • ASTM A234 Gr WP9 Alloy Steel Cap
  • Alloy Steel WP9 Pipe End Cap
  • Alloy Steel WP9 End Pipe Cap
  • Alloy Steel A234 Grade WP9 Buttweld Cap
  • A234 WP9 Butt Weld Pipe Caps
  • AS SA234 WP9 Pipe Cap
  • Alloy Steel ASTM A234 WP9 End Cap

Price List of Alloy Steel WP9 Pipe Fittings

Price of Alloy Steel WP9 Butt weld Pipe Fittings ASTM A234 : US $800 - 1200 / Piece (FOB Price)

Price of Alloy Steel ASME SA234 WP9 Buttweld Pipe Fittings : US $800 - 1200 / Piece (FOB Price)


ASTM A234 WP9 Fittings Dimension

Butt Welding Pipe Fitting Dimensions
Nominal Pipe
Size 		Diame
ter 		Center to Face Back to Face Center to Center Length 'L'

 

 

 

 

 

 

 

 

 

 

 

 

 MSSSP43

B16.9
Inch. mm D A B C N E F G R M S L L
1/2 15 21.30 19.50 7.94 25.40 . 25.40 47.63   76.20   34.93
50.8 		76.3
3/4 20 26.7 28.58 14.29 28.58   25.40 42.86   57.15   42.86 50.80 76.20
1 25 33.40 38.10 22.23 38.10 25.40 38.10 55.56 41.28 76.20 50.80 50.80 50.80 101.60
11/4 32 42.20 47.63 25.40 47.63 31.75 38.10 69.85 52.39 95.25 63.50 63.50 50.80 101.60
11/2 40 48.30 57.15 28.53 57.15 38.10 38.10 82.55 61.91 114.30 76.20 73.20 50.80 101.60
2 50 60.30 76.20 34.93 63.50 50.80 38.10 106.36 80.96 152.40 101.60 92.08 63.50 152.40
21/2 65 73.00 95.25 44.45 76.20 63.50 38.10 131.76 100.01 190.50 127.00 104.78 63.50 152.40
3 80 88.90 114.30 50.80 85.73 76.20 50.80 158.75 120.65 228.60 152.40 127.00 63.50 152.40
31/2 90 101.60 133.35 57.15 95.25 88.90 63.50 184.15 139.70 266.70 177.80 139.70 76.20 152.40
4 100 114.30 152.40 63.50 104.78 101.60 63.50 209.55 158.75 304.80 203.20 157.16 76.20 152.40
5 125 141.30 190.50 79.37 123.83 127.00 76.20 261.94 196.85 381.00 254.00 185.74 76.20 203.20
6 150 168.30 228.60 95.25 142.88 152.40 88.90 312.74 236.54 457.20 304.80 215.90 88.90 203.20
8 200 304.80 304.80 127.00 177.80 203.20 101.00 414.30 312.70 609.60 406.40 269.80 101.60 203.20
10 250 273.10 381.00 158.70 215.90 254.00 127.00 514.53 390.53 762.00 508.00 323.85 127.00 254.00
12 300 323.90 457.20 190.50 254.00 304.80 152.40 619.13 466.73 914.40 609.50 381.00 152.40 254.00
14 350 355.60 533.40 222.25 279.40 355.60 165.10 711.20 533.40 1066.80 711.20 412.75 152.40 304.80
16 400 406.40 609.60 254.00 304.80 406.40 177.80 812.80 609.80 1219.20 812.80 469.90 152.40 304.80
18 450 457.20 685.80 285.75 342.90 457.20 203.20 914.40 685.80 1371.60 914.40 533.40 152.40 304.80
20 500 508.00 762.00 317.50 381.00 508.00 228.60 1016.00 762.00 1524.00 1016.00 584.20 152.40 304.80
22 550 559.00 838.20 342.90 419.10 558.80 254.00 1117.60 838.20 1676.40 1117.00 614.40 152.40 304.80
24 600 610.00 914.40 381.00 431.80 609.60 266.70 1219.20 914.40 1828.80 1219.20 692.15 152.40 304.80

SA 234 Grade WP9 Fitting Standard Weights

DIN Schedule 10S Schedule 40S Schedule 80S
90° Elbow 45° Elbow Equal Tee 90° Elbow 45° Elbow Equal Tee 90° Elbow 45° Elbow Equal Tee
8 0.02 0.01 0.03 0.03 0.02 0.06 0.04 0.03 0.07
10 0.03 0.02 0.05 0.03 0.02 0.03 0.06 0.04 0.09
15 0.06 0.03 0.09 0.08 0.04 0.10 0.10 0.05 0.14
20 0.07 0.03 0.13 0.08 0,04 0.17 0.11 0.05 020
25 0.14 0.08 0.28 0.15 0.11 0.29 0.22 0.14 0.38
32 0.23 0.11 049 0.26 0.17 0.69 0.40 0.23 0.68
40 0.30 017 0.68 0.40 0.23 0_86 0.51 0.29 1.02
50 0.50 0.25 0.85 0.70 0.40 1.28 0.91 0.59 139
65 0.85 0.48 1.41 1.40 0.77 2_19 1.81 0.99 3.13
80 1.25 0.63 1.77 2_20 1.08 331 2_97 1.50 4.45
90 1.70 0.75 2.67 2.83 142 4.08 4.00 2.00 5.44
100 L10 1.08 3.46 4.47 2.09 527 6.18 2.81 7.71
150 5.45 2.72 8.07 10.139 5.44 10.99 1632 8.16 13.61
200 1010 5.33 15.65 21.54 10.77 20.91 33.11 16.56 28.12
250 18.15 9.75 26.46 38.56 1927 35.38 51.71 25.86 49.90
300 25.80 13.62 39.46 59.42 29.71 62_14 7938 39.69 83.91

Alloy Steel WP9 Butt weld Pipe Fittings Available Stock at Leoscor Alloys

We have Largest inventory of Alloy Steel WP9 Pipe Fittings. Alloy Steel WP9 Buttweld Pipe Fittings, A234 Alloy Steel WP9 Buttweld Pipe Fittings Suppliers, ASTM A234 AS WP9 Butt weld Fittings Exporter, Alloy Steel WP9 Butt weld Elbow, Alloy Steel WP9 Pipe Fittings Dealer, WP9 Alloy Steel Seamless Pipe Fittings Suppliers in Mumbai, India, ANSI B16.9 Alloy Steel WP9 Pipe Reducer, Alloy Steel WP9 Welded Pipe Fittings, Chrome Moly WP9 Buttweld Fittings, ASTM A234 Alloy Steel WP9 Pipe Fittings Stockholder, Alloy Steel WP9 Pipe Nipple, Chrome Moly WP9 Long Stub Ends, Alloy Steel A234 WP9 Pipe Bend, Alloy Steel WP9 Reducer Distributors, WP9 Alloy Steel Concentric Reducer, Alloy WP9 Reducing Elbow, Alloy Steel ASTM A234 WP9 Tees, Alloy Steel WP9 Long Radius Bend, ASME SA234 Alloy Steel WP9 90 deg Elbow Suppliers, WP9 Pipe Fittings, Alloy Steel A234 WP9 Eccentric Reducer, Alloy Steel WP9 Pipe Fittings Stockist, ANSI B16.9 AS WP9 Stubends, Alloy Steel WP9 End Pipe Cap, A234 Alloy WP9 Cross Suppliers, We are india's most trusted Manufacturer, Suppliers & Exporter of Alloy Steel WP9 Pipe Fittings, ASTM A234 Alloy Steel WP9 Buttweld Fittings are Available in Different Dimensions and Specifications in INDIA.


ASTM A234 Alloy Steel WP9 Pipe Fittings Application Industry


Alloy Steel WP9 Pipe Fittings For Gas Processing Industries

Gas Processing Industries

Alloy Steel WP9 Butt weld Pipe Fittings For Petrochemical Industries

Petrochemical Industries

Alloy Steel WP9 Butt weld Fittings For Power Generation Industries

Power Generation Industries

WP9 Alloy Steel Buttweld Pipe Fittings For Food Processing Industries

Food Processing Industries

ASTM A234 Alloy Steel WP9 Pipe Fittings For Chemical Industries

Chemical Industries

Alloy Steel WP9 Butt weld Fittings For Oil & Gas Industries

Oil & Gas Industries

ASME SA234 Alloy Steel WP9 Butt weld Pipe Fittings For Fertilizers Industries

Fertilizers Industries

Alloy Steel WP9 Butt weld Pipe Fittings For Sugar Industries

Sugar Industries