ASTM B473 Alloy 20 Bars Supplier, Exporter, Manufacturer

Bar Forms and Finishes We Supply

Round bars run 6mm to 250mm diameter in black, peeled, or bright polished finish. Rectangle and hex sections cut to length on request. Forged bar covers diameters above 250mm for large valve bodies and pump shafts. Square and flat bars complete the range for fabricators building acid-handling equipment.

Leoscor Alloys manufactures and supplies ASTM B473 Alloy 20 Bars from our Mumbai facility to buyers across India and overseas. As an established Alloy 20 round bar supplier, we stock this columbium-stabilized nickel-iron-chromium material in round, rectangle, hex, square, and flat sections. Also known as WNR 2.4660, UNS N08020, Carpenter 20, and 20Cb-3, every Alloy 20 bar we ship carries mill test certificates and third-party inspection reports.

The alloy combines 32 to 38% nickel with 19 to 21% chromium and 3 to 4% copper. That copper addition stabilizes the passive oxide layer in both oxidizing and reducing acid mixtures. A 25mm Alloy 20 round bar machined into a valve stem for a phosphoric acid line will outlast an equivalent 316 stainless part by years, not months, because standard austenitic grades lose their passive layer under the same conditions.

Exporting Alloy 20 Bar to the Middle East, Africa, and Asia

Leoscor Alloys exports Alloy 20 bar stock to Turkey, Egypt, Singapore, Malaysia, Indonesia, Jordan, South Africa, Oman, Qatar, and Italy. Orders ship with mill certificates, inspection reports, and packing suited to each destination port. Petrochemical and fertilizer plants in these regions account for most repeat orders.

Alloy 20 Bars Specification :

Specifications	:	ASTM B 473
Sizes	:	15NB to 150NB In
Length	:	100 mm To 3000 mm Long & Above
Form	:	Round, Square, Hex (A/F), Rectangle, Flat
Type	:	ASTM B 473 Alloy 20 Bars

Alloy 20 Round Bars

Alloy UNS N08020 Bars

ASTM B473 20 Alloy Bars Equivalent Grades

STANDARD	UNS	WERKSTOFF NR.	AFNOR	EN
Alloy 20	N08020	2.4660	Z2NCUD31-20AZ	NiCr20CuMo

Alloy UNS N08020 Round Bars Chemical Composition

Alloy 20	Ni	C	Mo	Mn	Si	Fe	P	S	Cr	Nb	Cu
Alloy 20	32 – 38	0.02 max	2 – 3	1 – 2	0.7 max	Bal	0.02 max	0.005 max	19 – 21	0.1 – 0.3	3 – 4

Alloy WERKSTOFF NR. 2.4660 Bar Mechanical Properties

Density	Melting Point	Yield Strength (0.2%Offset)	Tensile Strength	Elongation
8.1 g/cm3	1443 °C (2430 °F)	Psi – 35000 , MPa – 241	Psi – 80000 , MPa – 551	30 %

Price List of Alloy 20 Bars

Price of Alloy Bars ASTM B473 20 : FOB Price: US $4000-10000 / Ton

Price of Alloy ASME SB473 20 Bars : FOB Price: US $4000-10000 / Ton

Alloy 20 Bars Available Stock at Leoscor Alloys

We have Largest inventory of Alloy 20 Bars. Alloy 20 Bar Suppliers, ASTM B473 Alloy 20 Bars Exporter, Alloy 20 Threaded Bars, Incoloy alloy 20 Round Bar, Alloy 20 Round Bars Dealer, Carpenter 20 Bars, Alloy 20 Black Bars Suppliers in Mumbai, India, Alloy 20Cb-3 Bars, Nickel Alloy 20 Bar, Alloy NiCr20CuMo Bars, Alloy UNS N08020 Bars Stockholder, Alloy 20 Square Bars Distributors, Alloy DIN 2.4660 Bars, Alloy 20 Hex Bars, Nickle Alloy 20 Round Bar, ASME SB473 Alloy Z2NCUD31-20AZ Bars Suppliers, Alloy UNS N08020 Bar, Alloy 20 Bright Bars Stockist, Alloy Carpenter 20 Polished Bar, Alloy 2.4660 Rectangle Bar, Incoloy alloy 20 Bars Suppliers, We are india's most trusted Manufacturer, Suppliers & Exporter of Alloy 20 Bars, Alloy 20 Round Bar are Available in Different Dimensions and Specifications in INDIA.

Frequently Asked Questions

What is Alloy 20 Round Bar used for? +

Pump shafts, valve stems, and fasteners in sulfuric acid, phosphoric acid, and pharmaceutical reactor equipment rely on Alloy 20 round bar for its resistance to hot acid attack.

What are the benefits of Alloy 20 Bar? +

Copper in the alloy stabilizes the passive oxide layer, so the bar resists pitting and stress corrosion cracking where 316 stainless fails within months of service.

What sizes are available in Alloy 20 Round Bar? +

Round bar stock runs 6mm to 250mm diameter, with forged bar covering larger sizes for pump shafts and valve bodies.

How do I choose a reliable Alloy 20 Round Bar supplier? +

Check for mill test certificates, third-party inspection reports, and batch traceability. Leoscor Alloys issues both with every shipment.

Which industries use Alloy 20 Round Bar? +

Petrochemical, fertilizer, pharmaceutical, and chemical processing plants specify it for equipment exposed to sulfuric and phosphoric acid.