Inconel 600 ASTM B166 Rods Supplier, Exporter, Manufacturer

Inconel 600 Round Bars for High-Performance Industrial Applications


Leoscor Alloys manufactures and exports ASTM B166 Inconel 600 round bar from Mumbai. The grade carries 72% nickel with 14 to 17% chromium, so it resists chloride ion stress corrosion cracking and handles service up to 1093°C. Listed as UNS N06600 or W.Nr. 2.4816, this alloy 600 round bar stays non-magnetic and welds without post-weld heat treatment in thin sections. Sulphur in the furnace atmosphere attacks it above 550°C. Buyers comparing Inconel 600 round bar suppliers ask for mill test certificates against B166 chemistry limits. Sizes for Inconel 600 bar range from 3 mm to 300 mm. Where oxidation resistance matters more, Inconel 601 round bar fits better, and Monel 400 round bar suits seawater duty.

Inconel 600 Threaded Fittings

ASTM B166 Inconel 600 Rods in Standard and Custom Sizes

We specialise in 600 Inconel Rods Exporting in Turkey, Egypt, Singapore, Malaysia, Indonesia, Jordan, South Africa, Oman, Qatar, Italy.

Inconel Alloy 600 Rods Specification :

Standards : ASTM / ASME
Designation : ASTM / ASME B166, SB166
Size : 10 mm - 300 mm diameters
Length : 100 mm To 3000 mm Long & Above
Grades : Inconel 600 (UNS No. N06600) Round Rods 2.4816
Form : Round, Square, Hex (A/F), Bush, Rectangle, Flat

Inconel 600 Rods

Inconel 600 Rods

Inconel UNS N06600 Rods

Inconel UNS N06600 Rods

ASTM B166 600 Inconel Rods Equivalent Grades

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST OR
Inconel 600 N06600 2.4816 NC15FE11M NiCr15Fe NCF 600 NA 13 МНЖМц 28-2,5-1,5 ЭИ868

Inconel UNS N06600 Rods Chemical Composition

GRADE Ni C Fe Si Mn S Cu Cr
Inconel 600 72.0 min 0.15 max 6.0 - 10.0 0.5 max 1.0 max 0.015 max 0.5 max 14.0 - 17.0

Inconel Alloy WERKSTOFF NR. 2.4816 Rods Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.47 g/cm3 1413 °C (2580 °F) Psi - 45,000 , MPa - 310 Psi - 95,000 , MPa -655 40 %

Price List of Inconel 600 Rods

Price of Inconel Rods ASTM B166 600 : FOB Price: US $1-10 / Kilogram

Price of Inconel Alloy ASME SB166 600 Rods : FOB Price: US $1-10 / Kilogram


Inconel Alloy 600 Rods Available Stock at Leoscor Alloys

We have Largest inventory of Inconel 600 Rods. Inconel Rods, Inconel 600 Rod Suppliers, ASTM B166 Inconel 600 Rods Exporter in Turkey, Inconel Alloy 600 Threaded Rods, Inconel 600 Rods Dealer, Inconel 600 Black Rods Suppliers in Mumbai, India, Nickel Alloy 600 Rods, Alloy 600 Rods, Inconel UNS N06600 Rods Stockholder, Inconel NCF 600 Rods, Inconel 600 Square Rods Distributors, Inconel DIN 2.4816 Rods, Inconel 600 Hex Rods, ASME SB166 Inconel 600 Rods Suppliers, UNS N06600 Rods, JIS NCF 600 Bright Rods Stockist, Alloy 600 Rods, Inconel WNR 2.4816 Rods, Inconel 600 Rods Suppliers, We are india's most trusted Manufacturer, Suppliers & Exporter of Inconel 600 Rods, Alloy 600 Rods are Available in Different Dimensions and Specifications in INDIA.


ASTM B166 600 Inconel Alloy Rods Application Industry


Inconel 600 Rods For Gas Processing Industries

Gas Processing Industries

Inconel Rods For Petrochemical Industries

Petrochemical Industries

Inconel Alloy Rods For Power Generation Industries

Power Generation Industries

600 Inconel Alloy Rods For Food Processing Industries

Food Processing Industries

ASTM B166 Inconel Rods For Chemical Industries

Chemical Industries

Inconel Rods For Oil & Gas Industries

Oil & Gas Industries

ASME SB166 Inconel 600 Rods For Fertilizers Industries

Fertilizers Industries

Alloy 600 Rods For Sugar Industries

Sugar Industries


FAQs

What is Inconel 600 round bar used for?

Furnace retorts, muffles, and heat-treating fixtures take most of this bar. It also goes into titanium dioxide plant hardware, caustic soda handling parts, and nuclear steam generator components, where chloride cracking is the main concern. Machined valve stems and fasteners for chemical service make up the rest.

What are the properties of Inconel 600 round bars?

Chemistry sits at 72% nickel minimum, 14 to 17% chromium, and 6 to 10% iron. In the annealed condition, the bar gives 550 MPa tensile strength, 240 MPa yield, and 30% elongation. Density is 8.47 g/cm³, and the alloy stays non-magnetic at room temperature.

What is the difference between Inconel 600 and Alloy 600 round bars?

Both names cover UNS N06600, so round bar carries the same composition limits either way: 72% nickel minimum, 14 to 17% chromium and 6 to 10% iron, all certified to ASTM B166. The name on the quote does not change the mechanical properties, but the supplied condition does, since B166 sets separate tensile and yield minimums for annealed, hot finished and cold drawn bar.

What standards are Inconel 600 round bars manufactured to?

ASTM B166 and its ASME equivalent SB166 cover rod and bar in this grade. Aerospace buyers call out AMS 5665 for annealed bar. European orders reference W.Nr. 2.4816 under DIN 17752.

How do you select the right Inconel 600 round bar for industrial applications?

Start with the service atmosphere. Sulphur-bearing gas rules the grade out above 550°C, and carburising conditions call for a higher chromium alloy. After that, fix the condition, annealed for forming and welding or cold-drawn for straightness and machining, and then add stock allowance to the diameter.

Need Quality Steel & Alloy Products at the Best Price?

Tell us the grade, size and quantity you need. Our team reverts with stock availability.